Project knowledge
Measure before you buy
Original measurement guides that lead directly into a material estimate — practical planning, not generic filler.
Cost planning guide
Concrete Cost per m³ in the UK: How a Delivered Price Is Built
Concrete cost per m³ in the UK is the supplier's rate × billed volume, plus part-load, pump, waiting time and 20% VAT. Worked 2.4 m³ slab example inside.
Read guide →
Materials estimating guide
How Much Screed Do I Need? (UK Volume, Depth and Bags)
How much screed do I need? Multiply floor area by depth: 10 m² at 50 mm is 0.5 m³. Minimum depths, screed over UFH and insulation, and 25 kg bags per m².
Read guide →
Materials estimating guide
How Much Decking Do I Need? (UK Boards, Joists and Screws)
How much decking do I need? Rows = deck width ÷ (board + 5 mm gap), times boards per row, plus 10%. UK board sizes, joists, screws and a 3.6 × 4.8 m example.
Read guide →
UK plasterboard ceiling guide
How to Measure a Ceiling for Plasterboard
Measure a UK ceiling in sections, compare area count with a board-layout count, and round 2400 × 1200 mm or 1800 × 900 mm plasterboard up to whole sheets.
Read guide →
UK stud-wall measurement worksheet
How to Measure a Stud Wall for Materials (UK)
Record wall runs, height, stud centres, openings, plasterboard faces, insulation coverage and sale units before using a UK stud-wall calculator.
Read guide →
Concrete planning guide
How Much Postcrete per Fence Post (UK)
Turn fence-post hole size into rapid-set post-mix bags for UK fencing using the bags-per-post figure printed on the label, with more for gate and corner posts.
Read guide →
Sub-base planning guide
How Much MOT Type 1 Sub-Base Do You Need?
Work out the tonnes of MOT Type 1 sub-base for a UK drive or patio, taking compacted depth, compaction allowance and density as plan and supplier inputs.
Read guide →
UK materials guide
How Much Paint Do I Need? (UK, Litres and m²)
Work out emulsion for UK walls: measure in metres, deduct openings, multiply by two coats, divide by the tin's m² per litre, and round up to whole tins.
Read guide →
UK materials guide
How Much Ballast and Cement for 1m³ of Concrete? (UK)
About 18 × 25 kg bags of cement and 1.2 m³ of all-in ballast make 1 m³ of general-purpose concrete at 1:4. Ratios, bulk bags and quantities for 2 m³ and 3 m³.
Read guide →
UK materials guide
Plasterboard Sizes and Coverage (UK)
UK plasterboard sizes and coverage: the 2400 × 1200 mm sheet at 2.88 m², the 1800 × 900 mm sheet, 9.5 and 12.5 mm thicknesses, edge types, and sheet counts.
Read guide →
Measurement basics guide
How to Calculate Square Footage in the UK (ft² and m²)
Calculate room square footage in the UK by splitting the floor into sections, measuring in metres, and converting exactly to square feet.
Read guide →